(1) to be stored indoors, never allow direct sunlight or rain.

(2) hand code, put the height of not more than two meters. There shall be no heavy objects between the plates and no hard objects between the plates.

(3) Keep the storage room clean, dry, to avoid dust intrusion. Do not store other chemicals in the room at the same time.

(4) storage, shall not damage or tear off the protective film.

(5) transport must be flat on the surface of the plate is greater than the clean flat tray, if necessary, should be properly tied to avoid vibration and sliding, pay attention to protect the board edge is not damaged and double-sided protective film intact.